E : Booting error
E : Booting error
My DP-p1 has a E : Booting error and wont turn on. I had to turn it off when I tried to run an MKV movie from an external hard drive that didn't work. When I tried to turn it back on again all I got was the E : Booting error message on the screen of the wiz. Can anyone help? Cheers
-
- Wizard God
- Posts: 32712
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
We had an E: BOOTING error on our P2, and I tried fairly hard to find a way of running the firmware recovery tool without having XP running as the native OS, but I failed. I eventually ran the recovery tool on a old machine at a friend's.farbs73 wrote:Thanks Peter, I'll have to find someone with XP. Either way Warkus said he can help me. Cheers
I can dig out the thread about it if you're interested in the messy details.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Wizard God
- Posts: 32712
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
That much I'd worked out. Just never got it working on my Mac. OS X gets in the way of running some daemons the way you'd want to sometimes.peteru wrote:prl,
It's just canned bootp/tftp. 10Mbit hub with a box running Wireshark attached will give you the details. Or you could search the ASCII strings in the Win32 binary and try to deduce what may be required.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
E: Booting
To Farbs,
Hi, did you find a solution to this problem as it has just happened to me and I cannot remotely update. Please email me at dempete@optusnet.com.au
Thanks.
Hi, did you find a solution to this problem as it has just happened to me and I cannot remotely update. Please email me at dempete@optusnet.com.au
Thanks.
-
- Wizard God
- Posts: 32712
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
A search on the forum didn't reveal anything more than that the firmware recovery tool is "untested" on Vista. It definitely doesn't work on Win7.fozzy wrote:Same problem just happened to me too.
Is Window XP is a must or can I give it a go on Vista?
It's not much effort to test it, though. It may be useful to find out for sure.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
No luck. I got as far as connecting my FV-L1 to my router and turned it on using the 1-2-3-4 process. It started initializing then came up with the error "E:network"
I am pretty much a luddite so perhaps I did something wrong?? For example, the only IP address that I had available in the RemoteUpdate drop down box was that of the router. I tried direct connection to my pc but it didn't seem to work??
Is this something I can get fixed somewhere? What about this warkus dude?
Then again, perhaps I might just chuck the machine in the bin and get something else ... never been that happy with it (again - quite possibly driver error).
I am pretty much a luddite so perhaps I did something wrong?? For example, the only IP address that I had available in the RemoteUpdate drop down box was that of the router. I tried direct connection to my pc but it didn't seem to work??
Is this something I can get fixed somewhere? What about this warkus dude?
Then again, perhaps I might just chuck the machine in the bin and get something else ... never been that happy with it (again - quite possibly driver error).
Re: E : Booting error
Does anyone have the RemoteUpdate.exe file?
I can't find it on any of the sites mentioned previously.
I've got a DP-P1 showing the E:Booting error.
I can't find it on any of the sites mentioned previously.
I've got a DP-P1 showing the E:Booting error.
Re: E : Booting error
Incidentally, the second post in this thread points to http://www.beyonwiz.com.au/phpbb2/viewt ... 1149#91149 which gives a 404 error.
It looks like the beyonwiz server forum URLs changed at some point, and the correct address is now:
http://www.beyonwiz.com.au/forum/viewto ... 1149#91149
BTW: If you encounter this with other forum links, just replace "phpbb2" with "forum"
It looks like the beyonwiz server forum URLs changed at some point, and the correct address is now:
http://www.beyonwiz.com.au/forum/viewto ... 1149#91149
BTW: If you encounter this with other forum links, just replace "phpbb2" with "forum"
Re: E : Booting error
Answered in the General Discussion section.
__________________________________
Paul
Beyonwiz T4, 2 x U4: FW - 19.3 20211010
Samsung QA85Q80BAWXXY 4K TV
Samsung QA65Q80TAWXXY 4K TV
Samsung HW Q800BXY soundbar
OverlayHD 1.70, IceTV, Foxtel IQ4
2 x Win7 PCs, 2 x Win10 PCs
Denon AVR -X2400H
Paul
Beyonwiz T4, 2 x U4: FW - 19.3 20211010
Samsung QA85Q80BAWXXY 4K TV
Samsung QA65Q80TAWXXY 4K TV
Samsung HW Q800BXY soundbar
OverlayHD 1.70, IceTV, Foxtel IQ4
2 x Win7 PCs, 2 x Win10 PCs
Denon AVR -X2400H