Installing LiDiC
Installing LiDiC
Hi folks
After buying a ps1, I have now gone one step further to the LiDiC.
Having trouble installing the unit.
I have Foxtell so i want to connect that to the LiDiC. Do I need to rescan the stations or does it automatically detect the LiDiC?
I upgraded the firmware only last week. Do I need to obtain firmware for this unit and so where from.
Thanks for your help
Ray
After buying a ps1, I have now gone one step further to the LiDiC.
Having trouble installing the unit.
I have Foxtell so i want to connect that to the LiDiC. Do I need to rescan the stations or does it automatically detect the LiDiC?
I upgraded the firmware only last week. Do I need to obtain firmware for this unit and so where from.
Thanks for your help
Ray
Installiong LiDiC
Thank you
Excuse my dumbness about this but how do I go into settings and set it up. Have had a look and can't even find the LiDiC settings in there. I think I have firmware update of 192 and I thought that was the latest.
Thanks again and jind regards
Ray
Excuse my dumbness about this but how do I go into settings and set it up. Have had a look and can't even find the LiDiC settings in there. I think I have firmware update of 192 and I thought that was the latest.
Thanks again and jind regards
Ray
Installing LiDiC
yes and There are the two lidic stations 950 and 951. When I select one all I get is a crackling noise from the speakers
Regards
Ray
Regards
Ray
How have you got it hooked up?
For me I just set it to:
LiDiC = Enable
Display = Full
Input 1 = Composite
Video Type 1 = PAL
Input 2 = S-Video
Video Type 2 = PAL
I also have to have the Audio Format, in the A/V Output menu, set to 5.1ch or I get no audio. Then I connect any S-Video equipment to Input 2 and switch the beyonwiz to ch 951.
You are watching via the normal beyonwiz outputs? Not via the LiDiC's Monitor output?
For me I just set it to:
LiDiC = Enable
Display = Full
Input 1 = Composite
Video Type 1 = PAL
Input 2 = S-Video
Video Type 2 = PAL
I also have to have the Audio Format, in the A/V Output menu, set to 5.1ch or I get no audio. Then I connect any S-Video equipment to Input 2 and switch the beyonwiz to ch 951.
You are watching via the normal beyonwiz outputs? Not via the LiDiC's Monitor output?
cheers
DaveR
IceTV, T4, T3, T2, P2, S1, FV-L1(P1 fw), TRF-2460, HDR-7500 and Skippa
DaveR
IceTV, T4, T3, T2, P2, S1, FV-L1(P1 fw), TRF-2460, HDR-7500 and Skippa
Installing LiDiC
Thanks for all your help.
I seem to have got it working but don't really know what I did.
Regards
Ray
I seem to have got it working but don't really know what I did.
Regards
Ray