Firmware Update
Firmware Update
Hi all
I'm sure this has been answered a thousand and one times, but I just can't seem to make sense of anything I've seen.
I have a DP-P2 running firmware version 01.07.021. My 'Firmware Information' screen shows:
System Id 0908 0000 0A22 9E3C
Firmware Version DPP2-01.07.021
Loader Version 1.1.3.1.76
I've been to the international Beyonwiz site to get the latest firmware (and I've read the Jan 2010 post about the latest firmware updates) but I don't know if I should be getting 01.05.320 or 01.07.031.
I then looked at the 'instructions' on the international site and:
01.07.31 said 'Do not apply this firmware to product that has serial number 1032097A01150 or lower';
01.05.320 said 'Do not apply this firmware to product that has serial number 1032098BXXXXX or higher'
The SN on the back of my unit is 103209CA00694 which doesn't really help. Each warning has 7 digits and then the letter. My SN has 6 digits and the letter.
I know this is probably a stupid post, but I just don't want to get the wrong firmware and then have to spend hours reversing the mistake.
Thanks in advance.
I'm sure this has been answered a thousand and one times, but I just can't seem to make sense of anything I've seen.
I have a DP-P2 running firmware version 01.07.021. My 'Firmware Information' screen shows:
System Id 0908 0000 0A22 9E3C
Firmware Version DPP2-01.07.021
Loader Version 1.1.3.1.76
I've been to the international Beyonwiz site to get the latest firmware (and I've read the Jan 2010 post about the latest firmware updates) but I don't know if I should be getting 01.05.320 or 01.07.031.
I then looked at the 'instructions' on the international site and:
01.07.31 said 'Do not apply this firmware to product that has serial number 1032097A01150 or lower';
01.05.320 said 'Do not apply this firmware to product that has serial number 1032098BXXXXX or higher'
The SN on the back of my unit is 103209CA00694 which doesn't really help. Each warning has 7 digits and then the letter. My SN has 6 digits and the letter.
I know this is probably a stupid post, but I just don't want to get the wrong firmware and then have to spend hours reversing the mistake.
Thanks in advance.
Re: Firmware Update
These numbers are in hexadecimal and ordered from lowest to highest they would be:benoneill wrote: 01.07.31 said 'Do not apply this firmware to product that has serial number 1032097A01150 or lower';
01.05.320 said 'Do not apply this firmware to product that has serial number 1032098BXXXXX or higher'
The SN on the back of my unit is 103209CA00694
1032097A01150 (cut off for 01.07.x series)
1032098BXXXXX (cut off for 01.05.x series)
103209CA00694 (yours)
Thus you should use the 01.07.x series of firmware.
-
- Apprentice
- Posts: 36
- Joined: Sun Oct 07, 2007 07:11
- Location: Sunny Coast, QLD.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Looks like you should upgrade to 01.07.350. What firmware is installed? SETUP>System>Firmware>Firmware Information.Ultrasmart wrote:Sorry if this sounds dumb but I too am confused re P2 firmware. Mine has serial 103209AA00961, and is 500gb. Do I upgrade to 01.05.350 or 01.07.350 ? Thx for your help.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Apprentice
- Posts: 36
- Joined: Sun Oct 07, 2007 07:11
- Location: Sunny Coast, QLD.