I have two Beyonwiz units - a DP-S1 and a DP-P2. Both of these machines are experiencing a problem where the IceTV supplied EPG is going blank on the Beyonwiz. The only way to (temporarily) solve this is to reset the EPG (Setup->System->Initialise->Clear EPG Disk Cache) and the Beyonwiz will reload ...

It's been five years since this thread was posted into, but just wanted to again thank Warkus for making this repair guide available. It's invaluable! My DP-S1 started acting up recently and I figured the PSU must be dying, again. The main fault was that the hard drive wasn't coming up when the DP-S...

Incidentally, warcus mentioned that the E:Booting error is a sign that the Flash memory chip is starting to fail. I think I found a supply of the Flash memory chip on that board. I found the datasheet here: https://media-www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/pa...

Thanks everyone for the files and advice. I checked for ripple on the power supply rails and all seemed within spec. I also attempted to uploaded upload the firmware using the RemoteUpdate tool tonight, but it's not working. I'm running RemoteUpdate on a Win7 laptop (and selecting the correct .wrp f...

A copy of the firmware is here (for now, it will dissapear at some piont) https://1drv.ms/u/s!AqcpFuQQNh2DwCg89zLDmPlCiUhP?e=LNRNnV Thanks blip, I got the file! Much appreciated! If by chance you're able to also upload the DP-S1 and DP-P2 firmwares, I'll be happy to place them online somewhere perm...

Paul wrote: > You may have failed capacitors and/or voltage regulators on the mainboard too. > My former P2 had that problem. Caps are relatively easy to change if you have that skill. I'm an electronics engineer so fortunately do have that skill, although it's important to point out that folks don'...

Thanks very much Paul!
I have downloaded the file. It unzips and the files all look good.
Next question, does anyone have the latest firmware file (wrt?) for the DP-P1?

Incidentally, the second post in this thread points to http://www.beyonwiz.com.au/phpbb2/viewtopic.php?p=91149#91149 which gives a 404 error. It looks like the beyonwiz server forum URLs changed at some point, and the correct address is now: http://www.beyonwiz.com.au/forum/viewtopic.php?p=91149#911...

Does anyone have the RemoteUpdate.exe file?
I can't find it on any of the sites mentioned previously.
I've got a DP-P1 showing the E:Booting error.

Does anyone have the RemoteUpdate.exe file?
I can't find it on any of the sites mentioned previously.
I've got a DP-P1 showing the E-Booting error.

> the last firmware upgrade for the DP-S1 was in February 2011 The lastest firmware upgrade I can find for the DP-S1 is December 2010: http://www.beyonwiz.com.au/downloads.php > 01.05.350 December 2010 Was the Feb 2011 reference an error, or is there a Feb2011 file located in an unusual place? Thanks!

Hi Ian, Thanks for the post. How joyously cryptic of you. :D I presume you mean this thread: http://www.beyonwiz.com.au/phpbb2/viewtopic.php?t=6821&start=0&postdays=0&postorder=asc&highlight= Back on the original thread topic, here are some minor bugs which I've noticed: 1. (S1 only)...

It's now been 12 months since the last firmware update from Beyonwiz - on any of the DP machines as far as I can tell.
Is that the end of the line?

I think aaludo meant a new forum topic. @aaludo - Good idea - and I'm glad that you were able to confirm my experiments on your machine. How about you summarise the information for the BoB<->WizS1 combination and post it as a new forum topic - this will make it more visible. An administrator doesn't...

tonymy01 wrote:You don't need to fill all 4 keys, one is enough. 4 keys mean 4 times the chance someone manages to work out your key combo (unless they are all the same)

Thanks - I'd wondered about that.

After lots of experimentation I managed to get my Beyonwiz S1 talking to the iinet Belkin Bob. In my experiments, all combinations of WPA and WPA2 would not work. I wanted to use WPA2 for my main laptop access to the router, but heard that some people had got WEP to work. Then I noticed the 'bob' is...

I regularly use my DP-S1 to play CDs. And like craigsed, I don't want to have to turn on the TV (in my case a projector) to see the prompts. What I do is: - push the tray in with the CD - wait a few seconds to the disc to spin up and be recognised - press "OK" If I miss this sequence (and ...

Another suggestion from me for the next firmware wishlist: During the firmware upgrade process one of the pop-ups says "Upgrading System: Erasing in progress". I remember the first time I upgraded my S1 and was very worried all of my recordings and timers were being erased when I saw this ...

Hi Awoods, Welcome! Thanks! I've owned an DP-S1 since Dec 2007 and have been a long term reader of this great forum, but hadn't realised this was my first post. :D The new 301 firmware has changed the functionality of pressing the EJECT button on the face of the DP-S1 on power-up. In the previous f...

The new 301 firmware has changed the functionality of pressing the EJECT button on the face of the DP-S1 on power-up. In the previous firmware, pressing EJECT on the face of the S1 from standby, would power-up the unit and immediately open the tray on the DVD drive. With the new 301 firmware, pressi...

I found the following DVDs have problems on the DP-S1: Open Season (Region 4, PAL) - main meny is stuttery and without audio for first ~5 seconds - dolby digital logo stuttery and without audio for first ~5 seconds - commentary warning stalls for ~1min Monster House (R4, PAL) - pre-menu videos stutt...