Search found 44 matches
- Mon Mar 06, 2023 13:37
- Forum: General Discussion
- Topic: V2 Firmware Upgrade
- Replies: 1
- Views: 773
V2 Firmware Upgrade
My T4 recently died so I connected up a V2 I had inherited. It needs a firware upgrade as it is currenly 20191106. When I connected I reset to factory default and set up again. When I tried to do an online update I got the message (see attached). It has been saying that for 3 days now. I then tried ...
- Sun Mar 05, 2023 00:22
- Forum: General Discussion
- Topic: T4 Running Really Hot
- Replies: 7
- Views: 769
Re: T4 Running Really Hot
Thanks Peteru. I unplugged it tonight, worried about the risk of fire. I have a spare V2 so have set that up. I have Icetv so it was easy to copy all of my timers etc. I'm not all that technical with electronics so I might just have to bin the T4.
- Sat Mar 04, 2023 19:35
- Forum: General Discussion
- Topic: T4 Running Really Hot
- Replies: 7
- Views: 769
Re: T4 Running Really Hot
Thanks Peter. I have the fan running at 100% in standby. I've had it standby all day with the cover off and the fan runs constantly. I'm now using the wiz and obviously things are getting even hotter (cover still off). The 4 antenna inputs are too hot to touch and also the large heatsink under the h...
- Sat Mar 04, 2023 14:19
- Forum: General Discussion
- Topic: T4 Running Really Hot
- Replies: 7
- Views: 769
T4 Running Really Hot
Hi Guy's, I've had my T4 for many years now and all of a sudden it started running really hot and eventually shutting down. It is on a shelf but has a reasonable distance on all sides. It has been in the same location for years. I pulled it out and removed the cover. Some dust inside but not much so...
- Thu May 12, 2022 21:25
- Forum: General Topics
- Topic: USB Upgrade Not Working V2
- Replies: 4
- Views: 624
Re: USB Upgrade Not Working V2
Thanks everyone got it done in the end. 20220512_171555.jpg This menu came up after letting go of the power button. I was doing the usb upgrade but it didn't work it kept getting an error. Not sure if it was E02 or E03. Anyway I tried the network option instead and it worked. Funny thing is it told ...
- Thu May 12, 2022 04:24
- Forum: General Topics
- Topic: USB Upgrade Not Working V2
- Replies: 4
- Views: 624
USB Upgrade Not Working V2
I upgraded my V2 when ver 20211010 was released via usb and all went well. I've been having problems lately streaming shows over my network between my T4 and V2. I read another couple of users said that re-installing the firmware fixed the problem. I went ahead and downloaded both firmwares and was ...
- Fri Jul 10, 2020 22:21
- Forum: General Discussion
- Topic: Quality
- Replies: 3
- Views: 664
Re: Quality
Accept it doesn't work
- Sat Jul 04, 2020 03:07
- Forum: General Discussion
- Topic: Quality
- Replies: 3
- Views: 664
Quality
This is for a bit of fun only however it is true! My Dad is 85 years of age. He called me the other day to tell me that his PVR is not working. It's a Humax HDR 3000T. I thought ok it will be like a Beyonwiz inside, I'll just take the top off and check the capacitors out or maybe the hard drive. The...
- Sat Jan 18, 2020 14:45
- Forum: General Discussion
- Topic: Bouquets
- Replies: 17
- Views: 2123
Re: Bouquets
Thanks Gully that did the trick. Thats probably why I got it to work eventually before. Saved me a lot of time.
- Fri Jan 17, 2020 19:33
- Forum: General Discussion
- Topic: Bouquets
- Replies: 17
- Views: 2123
Bouquets
I've just upgraded to the new Firmware v19. 3 on my T2, T3 and T4 no problems. I have written down most of the settings that I like so it doesn't take long to get them back to normal after a big upgrade. One thing that I can't seem to get how I want is this. I use "Favourites" to cull the ...
- Sun Sep 16, 2018 13:51
- Forum: Networking
- Topic: T2 Hanging Up
- Replies: 3
- Views: 595
Re: T2 Hanging Up
Hi MrQuade,
Thanks for the advise, just checked and my subnet mask is set at 255.255.255.0
Thanks for the advise, just checked and my subnet mask is set at 255.255.255.0
- Sun Sep 16, 2018 13:05
- Forum: Networking
- Topic: T2 Hanging Up
- Replies: 3
- Views: 595
T2 Hanging Up
Hi, I have had a T2 for approx one year and yesterday it started playing up while trying to do anything to do with the network. I have a T3 and T4 that I can watch from any one of these devices over the network. Now when I try and set up a network mount the T2 just sits there with the spinning wheel...
- Fri Jan 26, 2018 03:41
- Forum: Networking
- Topic: Cannot Mount New T2
- Replies: 6
- Views: 836
Re: Cannot Mount New T2
Just checked my T2 that arrived 2 weeks ago. This has 16.1. When I got it I did usb upgrade to the latest firmware (apparently). Why would this not be 17.5? Also Beyonwiz advertising says that the models are all shipped with the latest firmware installed. My T2 was a few behind by the looks.
- Fri Jan 26, 2018 03:34
- Forum: Networking
- Topic: Cannot Mount New T2
- Replies: 6
- Views: 836
Re: Cannot Mount New T2
Thanks MrQuade you are correct I am on 16.1. The confusing thing was it is called "Image" and I didn't know what the numbers meant. I thought I was on the latest firmware because of the "Last Upgrade" section. I will bight the bullet tomorrow and upgrade from your link. But geez ...
- Fri Jan 26, 2018 02:19
- Forum: Networking
- Topic: Cannot Mount New T2
- Replies: 6
- Views: 836
Re: Cannot Mount New T2
Hi MrQuade,
All of my boxes are running 2017-03-10 in the last upgrade section on the info screen. I'm not sure what you mean by 17.5
All of my boxes are running 2017-03-10 in the last upgrade section on the info screen. I'm not sure what you mean by 17.5
- Fri Jan 26, 2018 01:55
- Forum: Networking
- Topic: Cannot Mount New T2
- Replies: 6
- Views: 836
Cannot Mount New T2
Hi, I have just received my new T2 and need some help. I already have a T3 and T4 and grabbed this one for the recently vacated games room (kids have gone). I have set it up the same as the T3 and T4 however I can't seem to mount the T2 on the T3 or T4. Example:- On the T4 I go into "Network Br...
- Mon Apr 17, 2017 00:52
- Forum: Ice TV
- Topic: Daily recordings not working.
- Replies: 106
- Views: 21028
Re: Daily recordings not working.
Thanks Geoff will give that a try.
- Thu Apr 13, 2017 15:42
- Forum: Ice TV
- Topic: Daily recordings not working.
- Replies: 106
- Views: 21028
Re: Daily recordings not working.
Well I scheduled a "Daily Timer" on my T3 instead of the T4. It all goes well initially. It puts the repeat timer in the schedule and fires that evening. After the event I look in the schedule and there it is. The news rescheduled for tomorrow night. Funny thing is when I get home the next...
- Mon Apr 10, 2017 02:17
- Forum: Ice TV
- Topic: Daily recordings not working.
- Replies: 106
- Views: 21028
Re: Daily recordings not working.
I'm not sure what you've done. Before the upgrade to 20170310, you were using IceTV, but you were setting a Beyonwiz-set daily timer to record the news. After the upgrade, are you doing the same, or are you now using an IceTV series recording? Hi Peter, I am using the Beyonwiz timer for the news. I...
- Sun Apr 09, 2017 03:38
- Forum: Networking
- Topic: Can't watch content between T3 & T4
- Replies: 1
- Views: 631
Can't watch content between T3 & T4
Before the firmware upgrade I could watch shows stored on my T3 or T4 on either machine by rooting the movie folder. Thanks to Simon Casey I was also able to create a "Symlink" and have a link directly in the movie folder without having to use the "Yellow Button". Now I cant even...
- Sun Apr 09, 2017 01:42
- Forum: Ice TV
- Topic: Daily recordings not working.
- Replies: 106
- Views: 21028
Daily recordings not working.
Since the latest firmware upgrade I cant seem to schedule a daily repeat recording. Let me clarify. I use icetv which I love. Before the update I had the news recording every night as a "repeated daily" (not through icetv) and every night the news was recorded. Now It works for the first d...
- Fri Oct 21, 2016 00:57
- Forum: General Topics
- Topic: T3 stuck on displaying Beyonwiz T3
- Replies: 306
- Views: 53222
Re: T3 stuck on displaying Beyonwiz T3
I can't believe it. My T3 has just developed the very same fault. First of all an endless "Booting" message and now displaying Beyonwiz-T3". This must be catching.
- Fri Aug 12, 2016 01:24
- Forum: General Topics
- Topic: Autotimers - what am I doing wrong?
- Replies: 10
- Views: 1156
Re: Autotimers - what am I doing wrong?
Just get icetv.
- Thu Mar 17, 2016 00:12
- Forum: General Topics
- Topic: Reception Quality
- Replies: 13
- Views: 1639
Re: Reception Quality
I have the same setup and the same problem.Fester1952 wrote:I have both a T4 and T3, both off the same antenna. T3 no problems but the T4 at times I get pixelation.
- Mon Mar 07, 2016 23:21
- Forum: Networking
- Topic: T3 IP Settings Gone
- Replies: 8
- Views: 1206
Re: T3 IP Settings Gone
Many thanks to Ian and Peter for your expert advice. Powering down and disconnecting all leads as instructed worked an absolute treat. I have my T3 back. It's fantastic to have this resource for people like me who are not particularly skilled in this area. Your knowledge amazes me. This is why I lov...
- Mon Mar 07, 2016 21:15
- Forum: Networking
- Topic: T3 IP Settings Gone
- Replies: 8
- Views: 1206
Re: T3 IP Settings Gone
Hi Ian,
Not a screen drawing problem. Just no network at all. I have attached a photo of the network screen as I can't do a proper screen shot. I have plugged a couple of other devices into the same cable and they work perfectly.
Not a screen drawing problem. Just no network at all. I have attached a photo of the network screen as I can't do a proper screen shot. I have plugged a couple of other devices into the same cable and they work perfectly.
- Mon Mar 07, 2016 18:48
- Forum: Networking
- Topic: T3 IP Settings Gone
- Replies: 8
- Views: 1206
Re: T3 IP Settings Gone
Hi Ian,
The Network information screen is blank apart from the headings.
The Network information screen is blank apart from the headings.
- Mon Mar 07, 2016 16:16
- Forum: Networking
- Topic: T3 IP Settings Gone
- Replies: 8
- Views: 1206
T3 IP Settings Gone
Hi, I have a T3 that has been happily connected to my network (Ethernet cable) for the last couple of years. I went away on the weekend and when I returned I could not see it on my network. On the back of the T3 one Ethernet light is flashing orange and one is flashing green. I have swapped the cabl...
- Thu Nov 05, 2015 01:10
- Forum: Ice TV
- Topic: Ice TV Subscriptions
- Replies: 43
- Views: 5105
Re: Ice TV Subscriptions
Me to. At the stroke of midnight I lost access to icetv. I also thought we had a week to resubscribe but it appears not. Had to pay to be able to log in again. It's worth it though. I would really miss icetv if it was gone.
- Thu Apr 30, 2015 20:36
- Forum: Official Firmware Images
- Topic: Past Image Discussion beyonwiz-4.4-beyonwizt3-20150417
- Replies: 66
- Views: 16563
Re: Latest Firmware Upgrade and Discussion **New 17/04/2015
Did you have any luck resolving the T3 freezing with that damn spinner on the screen aidianshide? Mine does it quite a lot mainly when I try and go into the timer screen. It's only started since I upgraded the firmware and the only way to fix it is to turn the power switch off on the back of the uni...
- Thu Apr 30, 2015 01:44
- Forum: General Topics
- Topic: Streaming From Humax HDR-7500T/1TB
- Replies: 3
- Views: 601
Re: Streaming From Humax HDR-7500T/1TB
Just bought a new Blu-ray player, Oppo BDP-103AU and it plays the Humax files right out of the box. Also does Netflix which I only subscribed to a month ago. Life's good!
- Sun Nov 16, 2014 16:37
- Forum: General Topics
- Topic: Streaming from Open Webif
- Replies: 3
- Views: 1025
Streaming from Open Webif
Hi, Last time I tried streaming the T3 in Open Webif it opened with VLC Media player (or possibly Windows media player) and that worked just fine. Now i'm trying it and it keeps opening in itunes and that does not work. Anyone know how to tell Open Webif to use another media player? Can't find any s...
- Sun Oct 26, 2014 14:14
- Forum: General Topics
- Topic: Streaming From Humax HDR-7500T/1TB
- Replies: 3
- Views: 601
Re: Streaming From Humax HDR-7500T/1TB
Thanks Simoncasey.
- Sun Oct 26, 2014 02:10
- Forum: General Topics
- Topic: Streaming From Humax HDR-7500T/1TB
- Replies: 3
- Views: 601
Streaming From Humax HDR-7500T/1TB
Hi All, I'm having trouble streaming content from my Humax HDR-7500T/1TB to the T3 over my wired network via DLNA. I can watch video from the T3 to the Humax with no problems. I can skip, pause, play content from the T3 on the Humax just as well as I can directly on the T3 but I can't play anything ...
- Thu Oct 16, 2014 19:29
- Forum: General Topics
- Topic: Image freezing when skipping.
- Replies: 8
- Views: 2130
Re: Image freezing when skipping.
Thanks Scotty, I did search for the subject but couldn't find anything so I posted my own. Hopefully it's being worked on.
- Wed Oct 15, 2014 23:54
- Forum: General Topics
- Topic: Image freezing when skipping.
- Replies: 8
- Views: 2130
Image freezing when skipping.
When I do a skip during playback probably every 2 or 3 skips the T3 image "freezes" however the sound continues. I then have to skip again to correct it. Tonight I paused a recording and when I went to play it again the image froze but the sound continued. I could not correct this by skipp...
- Tue Oct 07, 2014 00:28
- Forum: FAQs, Tips & How to Guides
- Topic: Skip settings - using < and > buttons
- Replies: 255
- Views: 36487
Re: Skip settings - using < and > buttons
is it possible to get option to add up/down buttons to skip in a firmware update? If so it would be much appreciated :mrgreen: cheers Belly I agree Belly that would be most useful. I use the T3 and the DP-P2 and have the skips set up with the < > ^ and down arrow (on the DP-P2). Would be nice to ha...
- Wed Mar 19, 2014 02:52
- Forum: Pre-release Discussion
- Topic: IceTV????
- Replies: 173
- Views: 40262
Re: IceTV????
I must admit I was just about to hit the purchase button on the T3 until I found out that it may not support IceTV. It's a no brainer. No IceTV no T3 !!!
- Sat Jun 13, 2009 22:45
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: F/W 301 and Ch 7 sync
- Replies: 9
- Views: 2165
Hey Flash, I'm from Perth and the lip synch problem on 7HD is driving me nuts! I have however narrowed down a few things. It is not happening on other channels, even 7 SD is good. It is also not a Wiz problem. I have watched 7HD through my Panasonic Plasma direct and it is still way out. I then swap...
- Wed Apr 01, 2009 22:30
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: jpeg (jpg) not showing
- Replies: 5
- Views: 1209
I bought a new 14 mega pixel Digital SLR and the wiz won't display the photos over the network. I suspect that the file size is the problem as my old camera with file sizes at around 1MB were ok but my with new camera set on maximum resolution creates photos at about 5MB. I think I read somewhere th...
- Sun Mar 08, 2009 10:49
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: 5.1 Surround on DP-P2
- Replies: 8
- Views: 1705
- Sat Mar 07, 2009 21:51
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: 5.1 Surround on DP-P2
- Replies: 8
- Views: 1705
- Sat Mar 07, 2009 18:57
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: 5.1 Surround on DP-P2
- Replies: 8
- Views: 1705
- Sat Mar 07, 2009 16:01
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: 5.1 Surround on DP-P2
- Replies: 8
- Views: 1705
5.1 Surround on DP-P2
Hi Guys, I'm new to the forum. I just bought a DP-P2 and have a couple of questions. I have looked through the forum and seen a fair bit on 5.1 surround but am still a little confused. I know that I have got to set the to passthrough to get digital sound. I read somewhere that other users are seeing...