Beyonwiz Australia

exitguy

SOLD - Gone to a good home to see out its remaining days !!!

exitguy

Riley wrote: ↑
Wed Jun 21, 2023 16:12
G'day Exitguy. I'm assuming it's long gone but thought I'd try my luck. Did you end up selling this?

Still available, PM me if your interested.
Sorry for the delay in replying, was out & about and just got back in.

exitguy

1/ There was too much info I agree 2/ However, also went into more detail than I expected. 3/ Thanks and hope this email was a bit shorter and easier to gain info from. 1/ - Yep, totally agree. That was not only War & Peace but also the American Civil War + Spanish Civil War + WWI + WWII + Kore...

exitguy

gibster wrote: ↑
Mon Jan 23, 2023 19:35
Any idea what might be going on?

Can happen occasionally, just do what you did but make a note of your address before re-boot so you can check what you've been allocated in future & to make sure you don't get that bad address again.

exitguy

Still Available for any of you who want an additional or backup unit to your existing setups.

exitguy

Did you by any chance upgrade your receiver so you could play UHD HDR content, and have enabled "Enhanced HDMI" mode on the ports between the T2 and TV? If so, then this is the likely cause of the loss of audio. The T2's old HDMI chipset doesn't support the latest HDMI video signalling st...

exitguy

Price Drop
Now Asking $115, Pickup Only (Melbourne North East) or can meet at convenient location, Cash Only
PM if you need any more details or would like to purchase

exitguy

prl wrote: ↑
Thu Jun 30, 2022 10:54
Just curious, but what happened to the T2's original remote? The remote in the picture is for a T3 (but it will work perfectly well with a T2).

That's what it came with, just used it to setup and put away. Was using a Harmony 650 for day-to-day.

exitguy

fangios wrote: ↑
Wed Jun 29, 2022 13:55
Is this still for sale?

Yes, all sitting there waiting for a new owner.

exitguy

Beyonwiz T2 Bare Bones + Power Pack + Remote + Western Digital 120Gb SSD + Additional USB Tuner (Bluey) Excellent Condition, Always housed in Ent. Unit and cleaned regularly, Originally bought from Beyonwiz from new Current Firmware 19.3_20211010, settings always backed up - updated via USB for clea...

exitguy

The first thing that comes to mind is "HDMI Enhanced Mode". The T2 is incompatible with 4K HDR signally that is a part of the later HDMI specifications, so it will behave strangely if that mode is enabled. If you have recently turned on HDMI Enhanced mode on the receiver, or one of the in...

exitguy

When all else fails RTFM
https://beyonwiz.com.au/media/downloads ... 170619.pdf

exitguy

Did you try just ordering one on the website? I checked back, and I ordered mine online in the wee small hours of 24/10/19. Later that day in business hours, I had received a confirmation email, and by 1/11/19 it had arrived here in Perth and was up and running. Couldn't complain about that at all....

exitguy

Anders wrote: ↑
Sun Nov 21, 2021 20:23
Thanks for the reply, where do I get the latest beta firmware from?

Here --- beyonwiz-19.3 20211010 - third release candidate
viewtopic.php?f=56&t=14909

exitguy

I've got the Tuner selection set to 'Auto'. Is there any value in changing this and trying the other tuners one by one to see if that makes any difference ? Yes, a trial and error with each tuner might narrow down the problem to a dodgy tuner. If not, you need to consider other options from suggest...

exitguy

Would a total factory reset back to the original factory settings be worth trying ? Software is version 17.5 Build 20190207 Do a factory reset and update, you will have to re-enter any saved timers, settings etc. as going from 17.5 to 19.3 you cannot restore settings. Your on a really really old fi...

exitguy

Section 4.1
https://beyonwiz.com.au/t2/manual/Beyon ... 240615.pdf

exitguy

How to Enable Favourites ...
viewtopic.php?f=42&t=7821

exitguy

netmask wrote: ↑
Fri Apr 30, 2021 14:13
I have a Sony 75" X9500H 4K UHD Android Bravia LED TV and randomly the yellow power light doesn't come on although it is functioning normally.

Might be better to post over at Whirlpool as that model has a thread.

exitguy

I reckon it's been hacked, hope they are back soon.

exitguy

I can get no audio output from either my T2 or t3 when connected to an AVR (Yamaha RX-V685). Both work faultlessly when connected to a TV. I have looked at every audio setting and hdmi setting on the AVR to see what the issue may be but nothing seems to work. I was hoping to avoid using component c...

exitguy

T2 running 20201121 Just noticed last night that 7 & 7HD were not showing any EPG when called up, all other 7 channels as well as other providers working ok. Have done a rescan and checked Latest Scan, Terrestrial and Favourite listings - show icon but not description or programs. Anybody have t...

exitguy

T2 - running 19.3 20201011 (latest version updated via USB + recent small Beta update) Prior 20201011 update it was working fine, came out of Deep Standby & records & goes back to Deep Standby after recording completed Since 20201011 update it will not go back to the state it was in prior to...

exitguy

Any idea if this is a Kodi 17 issue as BW doesn't run Kodi 18 (like Netflix), a geo-blocking issue or should this query be better directed to the Kodi people? If you want to run Kodi properly get yourself a Media Player that has the "grunt" to be able to be dedicated to streaming, not a P...

exitguy

Could there be a USB tuner that has pass through so I plug the TV into the Belling-Lee socket? :) I've got a 4-way that works a treat, Wall Socket->Splitter->Sony TV, Foxtel IQ3, Beyonwiz T2 & Onkyo AVR (for FM) Had one of those cheap-n-nastie ones that kept giving issues, with the Antsig have ...

exitguy

Hoping someone can help my cause... Is there a way to lock the EDID information on the Beyonwiz box or do something to retain audio on HDMI? HDMI Standard will provide both Audio & Video via HDMI, HDMI Enhanced will only provide Video via HDMI and Audio needs to go via SPDIF Been there earlier ...

exitguy

Yes! I now have a 4K AV receiver and TV.. Sounds promising. I shall disable the deep colour. Give me a few minutes to figure this out, I shall get back with the results. You don't have too - I had the same problem with a T2 connected to an Onkyo AVR that had great video but no audio. Connect the Tx...

exitguy

Since yesterday here in Sydney, whenever I change to 9Rush, while the audio is ok, the video is frozen on a frame of the previous channel. Power off/on did not help, and 9Rush is the only channel this happens on. Needless to say, I haven't touched any settings and this just started happening out of...

exitguy

Tuner A Output connected to Tuner B Input, want to connect Tuner B Output to TV aerial input. Is the Tuner B Output active all the time, even when in DeepStandby ?? (always have the unit in this setting when not using) Solved, found the details in this post from years ago https://www.beyonwiz.com.au...

exitguy

PStepanas wrote: ↑
Fri Apr 17, 2020 20:24
So, which is my best option?

SSD = Quiet, Low Power draw
https://www.msy.com.au/wd-green-wds240g ... tate-drive
https://www.msy.com.au/unitek-y-1096-us ... -converter

exitguy

Any chance the following shutdown options can be added to a future firmware upgrade? . Ability to disable shutdown when recordings completed, to allow use as set-top box, and not have it shutdown on you when briefly leaving the room. Set the timer to return to previous state after recording rather ...

exitguy

It might be worth trying to select MPEG audio for the SBS channels streaming dual audio, and see if that overcomes any sound quality issues, particularly if with those channels audio defaults to HE-AAC. OK, all fixed - went through all the channels and found SBS to be the only one that has Dual Aud...

exitguy

I've started noticing the audio on SBS 30 and 31 is quite bad too, on both T2 and a Tivo. It sounds very "swishy", as if there is some compression artefacts with the higher frequencies. It's noticeable on voices of a particular timbre, and also things like audience applause clapping. It s...

exitguy

now with the V2 there is an arial input only - no HDMI In, no RCA, it appears as though they expect everyone to be watching TV through an arial only Arial = The name Arial is a Hebrew Baby Names baby name. In Hebrew Baby Names the meaning of the name Arial is: Sprite; lion of God. A biblical altern...

exitguy

IanL-S wrote: ↑
Mon Feb 24, 2020 14:53
The default SMB settings for Synology NAS seem to be dated, with min 1 and max 2; changing to 2.1 and 3 solved several problems here.

Ian

Same here, Min 2 Max 3 = better security which we all want.

exitguy

Not sure if it is just bad luck on my part, but I have found that CyberPower UPS go troppo - the alarm goes off - if the attached device has modest power requirements. Or worse, it refuses to allow current to pass to the attached devices. I found this with my Synology NAS (also had router and switc...

exitguy

A good way to corrupt hard drive is to have a power failure while writing to it. For this reason I am considering connecting a UPS and I will appreciate any assistance from anyone who has had experience with this. No point, as soon as you lose power everything stops. Modern drives do not corrupt wi...

exitguy

I can set it to Maximum SMB3. I wonder if that would fix my problem? Well, I've already fixed it by removing the ,ver2.1 but wonder if this is another fix? I left mine at SMB1 & SMB2 - T2 had not trouble finding it, letting me log in and adding to network mounts - when I checked the details in ...

exitguy

I had a quick Google and I couldn't work out how to upgrade the Samba version of my Synology 918+. Is this something I can upgrade or is it part of the DSM 6.2.2 O/S and can't be user upgraded? Go to File Services - SMB - Advanced Settings - in there you can set the Minimum & Maximum SMB levels...

exitguy

There isn't any place to fix the colours. If you aren't seeing any problem though, you can ignore it. Flipped between STD & ENH, 1080i & 1080p - all look pretty much the same so I've set it and Thunderbirds are Go !!! That has to be the cheapest HT fix I've ever made, had the S/DIF in a dra...

exitguy

Anywhere I can get the settings that I should use once I switch to ENH but want the old STD settings so colours are OK ?? I don't understand your question. You say that going to ENH may change the colour space, if that is the case is there anywhere that has settings or adjustments you use to put th...

exitguy

MrQuade wrote: ↑
Tue Jan 21, 2020 22:36
but just be mindful of those colours too. They're likely to be a bit off.

Anywhere I can get the settings that I should use once I switch to ENH but want the old STD settings so colours are OK ??

exitguy

Might get on the Onkyo Support and see if there is any way to do it via IR. Yea it can be really hit or miss. I have some quite old gear that doesn't mind it, but other stuff won't have a bar of it. Got onto Onkyo Support - can only be changed via the front panel but they have noted changing via IR...

exitguy

The T2 isn't compatible with Enhanced HDMI mode. Only the T4, U4 and V2 will tolerate that mode and maintain audio. You'll need to plug the T2 directly into the TV into a port that doesn't have enhanced mode enabled. This presumes that your Onkyo is like my Denon receiver, and that the enhanced mod...

exitguy

Onkyo TX-NR696 - Premium HDMI cable from Onkyo to Sony X9000F Enhanced HDMI/ARC T2, IQ3 & PC connected to Onkyo for video passthrough and audio processing using Standard HDMI cables, same manufacturer, same length (50cm) and which state "Conforms to HDMI Ver 2.0 Specification. Data rates up...

exitguy

Hi, after many years with a Topfield I have got a V2. Bit of a learning curve! Is there a way to delete unwanted channels? EG Racing.com Thanks, Paul. Don't delete as this can stuff up the terrestrial scan list - easier to setup Favourites with the channels you want so that that is what is selected...

exitguy

I don't know which button presses allowed me to set the other octets because I was pushing a lot of buttons. Firmware 19.3.20191106. There's half your problem - look and read before using buttons or mouse !!! Had people like that when I was in IT, we called them The Mousketeers because all they did...

exitguy

Got it - unit is off now so I'll do as you suggested tomorrow (Mon) and reply back as to results - thanks for the assistance.

exitguy

So, where on the Wiz menu system do I find which SMB version to use, I went through all the menus I could but didn't see anything. The 'Mount options' field in the mount shown in Mountpoints management/Mount Viewer. Network > Network Browser > Yellow (Scan) > screen shows all devices found > Red (C...

Search found 122 matches

About the Forum

Join us