Beyonwiz Australia

inedshead

Yes sorry, that was a typo... only the one soundbar. I should have added that I ran another 3m HDMI cable from the V2 directly to the telly and at 2160 it was perfect. I tried that same cable through the soudbar setup and had the green lines again. I'll do some more troubleshooting in daylight and w...

inedshead

Hi, The background to my story is that I have a V2, Nvidia Shield TV and XBOX One S, all connected with short 1m HDMI leads through a Blustream 4-way 4K HDMI switcher to an LG soundbar with another 1m HDMI lead to a 2020 LG Soundbar, then a 3m HDMI lead to a Hisense TV. To add complexity to this, I'...

inedshead

Hi Peter, quick update from my previous post... I made my own password rather use a generated one, with the username "root" and working well now to access via HTTP and HTTPS

inedshead

You set the password in MENU>Setup>Network>Password, and use that password and username root when you connect using OpenWebif. Hi Peter, just to be certain... I should state the username as "root" and then use the password I generated on the network settings page? I have tried that on bot...

inedshead

Thanks for yet again a very detailed reponse MrQuade. I realised by logging onto the webgui again this morning that there's no password prompt which, like what used to be there. I went to my PVR and selected on the OpenWebif that it uses HTTP authentication again, but I can't recall where to establ...

inedshead

One other thing I was thinking, is that in late June I configured the Kodi addon (which I love btw and is far better than my Plex experience especially on accessing recorded content), so just checking what the thoughts are on that being a secure addon and if I should disable it in an attempt to weed...

inedshead

Thanks for yet again a very detailed reponse MrQuade. I realised by logging onto the webgui again this morning that there's no password prompt which, like what used to be there. I went to my PVR and selected on the OpenWebif that it uses HTTP authentication again, but I can't recall where to establi...

inedshead

I don't ever change from using favourite bouquet on my TV but just been on the web GUI to grab a stream for my PC and noticed a 4th bouquet... apologies for the language but I definitely didn't create it so I'm wondering who/how it was? Any suggestions Mr Quade? Screenshot 2021-09-12 221615.png Next...

inedshead

I went looking for VU+ on latest Matrix build of Kodi but couldn't find anything... a few forums later, I found them referring to it as Enigma2 so I loaded that up from the Kodi respository under PVR and then configured it with IP of my V2 and some other settings with recordings, timers and favourit...

inedshead

Thanks MrQuade, great info as always. I've used the Plex plugin for a while now but find it a bit hit and miss as we've discussed in the past. I'll give the Kodi plugin a go, thanks for the suggestion.

inedshead

I recently bought a Chromecast with Google TV dongle for a spare TV and was wondering if there's an app like GB Player that is available in the Google TV app store... slightly different from Android store it seems? Aside from GB Player, are there any other apps that have been successfully used with ...

inedshead

Just some feedback... I had to stipulate the IP address of the V2 and port (in my case 6082) and it showed up immediately. Use the XMLTV reference from xmltv.net and it worked a treat... looks great, though I wish I could reorder the list. Will test out recording (and dare I say ad skipping), and se...

inedshead

Sorry, realised where I was going wrong... I hadn't defined a DNS in the network settings. Changed to DHCP because I've finally set up a reservation in my router, so all good now.

Installed the plug-in and will report back if I have any further hassles... but thanks again for your help.

inedshead

That seems to end up in the same place with same result...no new plugins found.

Is there anywhere to check what it's referencing to look for plugins?

inedshead

Replying from my phone browser so hope this comes out ok.

For some reason I can't download any plugins - photo attached - also showing which ones I have.

Thinking a fresh firmware download might be in order to fix this too?

inedshead

Sorry, think I've lost track of what files to upload to cover all the logs. Thought it was just etc/enigma2 and var/log/messages? I have a few spare Cat6 patch leads, but problem is more that I need to move my cabinet to get behind it and cut through the cable management to remove that one cable... ...

inedshead

Thanks, I tried finding the plugin earlier on the V2 but it says there aren't any plugin's available when I go to add one. I searched for it in the forum and found where you and I had originally discussed this when I had my T2. Do you have to download and install the plugin manually or should I be a...

inedshead

did some searching and see that the Hauppauge dual USB tuner that I have plugged into the V2 is compatible: https://support.plex.tv/articles/225877427-supported-dvr-tuners-and-antennas/?utm_source=Plex%20Apps&utm_medium=Plex%20Web&utm_campaign=Plex%20Apps Guess I could just plug that into my...

inedshead

I tried setting this up once on my previous T2, and it worked for a period but wasn't too reliable... always thought it was possibly down to lack of grunt from the T2. Wondering if this is something someone's tried with any degree of success, on a V2? I can't honestly remember the process I had foll...

inedshead

Everything seemed to have sorted itself out, as I could watch two more recorded programs last night.... but when I went to connect to it now on my desktop to watch the game from earlier, the HDD seems to have disconnected again. I had turned off HDD standby earlier in the week, but then for some rea...

inedshead

sorry yes, I may have done a hard reboot to avoid turning TV on and going through menu. I'll avoid that in future. Is there a way... and I haven't researched it at all... to have the front button reboot the machine, as from memory it didn't do anything when I was pressing it? I still wasn't able to ...

inedshead

Ah ok, sorry I misread that the first time.

There are 21 files, but i can only seem to upload the XML files as the rest don't seem to have file extensions. Tried archiving them but says "file not found or no read permission". Any suggestions on how to upload them all?

inedshead

Sorry, I didn't see your reply until a moment ago. So the kernel logs isn't a file called "kernel logs" but rather just information inside the "messages" file? With regards to the "etc" folder, did you want all files and folders uploaded to this topic? I can't seem to c...

inedshead

I've just tried adding a timer to record something now through the web browser GUI and nothing is happening, so I'm thinking the drive has disconnected again. Where do I find the kernel log and the enigma2 debug log? Just rebooted the unit from the web GUI and suddenly a recording from yesterday sho...

inedshead

the network problem is probably my fault, as I broke the clip off my network patch lead when swopping out my T2 to the V2 over the weekend and haven't replaced it. When I unplugged the drive earlier to swap the USB3-SATA cable, I dislodged the network cable slightly. I've since pushed it back in and...

inedshead

I'm not familiar with SFTP, but standard FTP seemed to get me there and I've attached the file. I tried using another SATA to USB3 cable from another WD external drive that I have, but experienced the same fault at around 7:20 tonight (if there's a timestamp in that file), while was recording someth...

inedshead

Thanks again for guiding me through this. I enabled HTTP authentication earlier and now I can't seem to log in through the web interface. I've just had a look online and in the manual for the default username and password but can't seem to find either. I'd appreciate it if you could provide those to...

inedshead

thanks for the detailed reply... all sounds rather complicated. Had a quick look at the SSD I'm using and they show the peak power consumption (read) to be 2,000mW and (write) 2,000mW, which if I guessed USB power to be 5V is a max draw of 500mA. I've requested another SATA to USB cable, so I'll see...

inedshead

Thanks again for your help MrQuade. Changed from Graphics to Text in EPG menu and then deselected graphics in text or something along those lines and perfect, back to what we were used to the on the T2

inedshead

I've had my V2 running for all of about 3 days, and noticed earlier tonight that an HDD error came up saying disk full. I was going through some timer menus at the time and thought I might have triggered something else so I left it, but had to reboot the machine to have my HDD show up again. I'm usi...

inedshead

I've just moved on from my beloved T2 and installed a new V2. One of the first settings changes was to select the Steel skin.. but noticed the EPG wasn't as easy to read as it had been on my T2. I compared a previous image I took of it with the new V2 and can immediately spot the difference. Is ther...

inedshead

I also noticed this tonight after setting up my new V2 yesterday, however I get 55% on Tuner A and B and 0% signal strength and 100% quality... or whichever way around they are...

inedshead

Thanks again for the quick reply. Assigning the optical audio to an HDMI input is how I used to run my Marantz AVR but with the soundbar, when I switch to optical audio, it cuts all video, so unfortunately not the best of the both worlds. I haven't noticed the colour change when setting things at de...

inedshead

Thanks for the quick response and explanation. There are some problems running multiple HDMI's to the TV, unrelated to the T2, in that the Hisense is shockingly bad with changing HDMI inputs from a control system (no discrete IR commends) so I prefer to leave it on HDMI 1 and do all my switching thr...

inedshead

Hoping someone can help my cause... I have a Hisense 65P7 TV and their manual recommends: "HDMI 2.0 Format: Match the connected device output format. Select Enhanced for devices with output of 4K, 60Hz, 4:4:4, 4:2:2 or 4:2:0, 10 bit and above." Problem being, as soon as I do this, audio dr...

inedshead

I'd try it briefly with a 12v, 2.5 or 3A supply and see if it looks normal. If so, a full reboot. Thanks mate, you're a star... tried an old 12V 5A power supply I had which used the same DC jack and it's working a treat. Life is back to normal! Dusted off the old multimeter and measured original su...

inedshead

I took a short video clip of the D11 flickering and showing where it is roughly on the board: https://photos.app.goo.gl/XSN7MDzr59kTDd828 Also to mention that when the unit originally froze, the front power light was solid red. After I turned power off and back on, the light has never come back on, ...

inedshead

Thanks for all the responses. Glad HDD and tuner are compatible :D I removed the hard driver from the unit as the ticking sounded like it was coming from underneath, but instead found the ticking to be roughly in time with an LED that is flashing. Is the suggestion to try another 12V, 3A power suppl...

inedshead

To my disappointment, my 5yr old T2 decided not to wake from its sleep this morning, and I soon realised there was a weird ticking noise and flashing LED from the inside, but that was all signs of life. Been researching the V2 today, but was wondering if the external USB tuner I received with my T2 ...

inedshead

Is there any plan to allow Airplay or Chromecast from the Beyonwiz app? I bought a Lenovo Smart Display earlier in the month and tried Chromecast from the Freeview app earlier, which works really well but I was hoping to rather use my Beyonwiz app so I can also access my recorded content? Would be g...

inedshead

Thanks MrQuade, your help has been tremendous. I realised that you have to push ok to see the pop up message come on, so I selected antenna and also took note of the port they reference on that screen and not the port I was using for the general stream to my PC or phone. I had to manually put the ad...

inedshead

I did go into the plugin originally and changed from Antenna to IPTV and back, but nothing more. I went in again earlier tonight and found when I chose Multi, that it gave a message about Plex so I left it on that mode and selected my bouquet as my Favourites. What I also noticed after changing to M...

inedshead

Hi, I recently read up about the recent firmware update and allowing Plex TV integration. How do you actually go about making it work? I have installed the HRTunerProxy on my T2 and have now just signed up for a Plex Pass, but when I go through DVR Setup on my Plex Server, it says it can't find the ...

Search found 43 matches

About the Forum

Join us