Beyonwiz Australia

ETA_2016

I've changed the names using putty, but the changes aren't showing up on the T4's list of recordings. I've restarted the GUI and rebooted the T4, neither of which helped.

What's going on, and how can I get the changes showing in the list of the T4's recordings?

ETA_2016

I believe this will do it: for name in *Album\ *; do mv "$name" "${name/Album/Albums}"; done Thank you adoxa. That's perfect. Something like this: for fn in *'News '*.*; do echo mv "$fn" "${fn/New/Old}" done That version prints what would be done: mv 20201206...

ETA_2016

prl wrote: ↑
Fri Jan 29, 2021 07:49
You can do it in a shell for loop.

Could you please provide the full command/instructions.

Thanks

ETA_2016

I'm trying to rename a bunch of recordings, the same way (*Album *.* --> *Albums *.*), without having to do each rename separately.

How can I do that? I can't install mmv or rename (no apt command), and mv doesn't work, so what can I do?

Thanks for any help.

ETA_2016

definitely a second customer here in Kalgoorlie! Works perfectly with streaming services included in the Favorites. Hi Henk, Just for you :) Updated first post with - Version 1.3: AutoVisit now detects any tuner use through current live TV/radio streaming, and takes that into account when deciding ...

ETA_2016

No new errors have been produced. So, AutoVisit is working fine and not producing any errors. Good. Thanks, for all your work on this project. Sure. Do you stream live TV/radio much from your T4? No, I've never done that; nor do I need to. I now know how to detect that live streaming, and it should...

ETA_2016

No, these errors were in the errors log file. I'm running AutoVisit normally (in the background, with the output to a log file). Hmm, my 'AutoVisit_errs.log' file is empty. ... Don't stress. I'll let it run a few times, to see if those errors keep reoccurring... No new errors have been produced. So...

ETA_2016

No, these errors were in the errors log file. I'm running AutoVisit normally (in the background, with the output to a log file). Hmm, my 'AutoVisit_errs.log' file is empty. The errors log file was empty, then updated, one second after the AutoVisit run start time, in the AutoVisit log file. Don't s...

ETA_2016

It's now fixed, and ran successfully, but produced the following errors: Redirecting output to 'wget-log.9'. Redirecting output to 'wget-log.10'. Redirecting output to 'wget-log.11'. Redirecting output to 'wget-log.12'. Redirecting output to 'wget-log.13'. From the command line right, and with the ...

ETA_2016

Sorry, for wasting your time; I just found that the flag files directory included /AutoVisit.sh! :oops: :oops: :oops: It's now fixed, and ran successfully, but produced the following errors: Redirecting output to 'wget-log.9'. Redirecting output to 'wget-log.10'. Redirecting output to 'wget-log.11'....

ETA_2016

I updated to version 1.2 and now AutoVisit won't run, due to not detecting the AutoVisit.allow file. I have triple checked that the flags directory is correct, and updated enigma2_pre_start.sh with the correct directory for AutoVisit. I have no idea why it's not working, and it's not generating any...

ETA_2016

I updated to version 1.2 and now AutoVisit won't run, due to not detecting the AutoVisit.allow file. I have triple checked that the flags directory is correct, and updated enigma2_pre_start.sh with the correct directory for AutoVisit. I have no idea why it's not working, and it's not generating any ...

ETA_2016

Well, I'm going to leave triplej in my Favourites (radio) bouquet active, let AutoVisit log the results, and whatever happens, happens. But, there is no chance whatsoever, that one of those bloody annoying shopping channels, or the cruel sport of horse racing channel, will be on the screen when I t...

ETA_2016

Thanks, but had you read the topic, you would have realised that, under certain conditions, the bouquet can change, without the bouquet shown in the infobar changing. I had the read topic, but not close enough - "though you cant tell, as info shows Favourites (radio)". :oops: Okay. Sorry,...

ETA_2016

I'm going to do some more zapping testing, with a radio service active. It won't be a happy outcome :P Well, I'm going to leave triplej in my Favourites (radio) bouquet active, let AutoVisit log the results, and whatever happens, happens. But, there is no chance whatsoever, that one of those bloody...

ETA_2016

Regarding the bouquet, how do I confirm which one is in use? Do I press TV or FAV, and see which bouquet is highlighted, or opened? It's at the bottom-left of the infobar (OverlayHD always had it, I added it for the default skins). Thanks, but had you read the topic, you would have realised that, u...

ETA_2016

Yes, the service was not changed when zapping (8 times), nor was the bouquet. Thought so. Regarding the bouquet, how do I confirm which one is in use? Do I press TV or FAV, and see which bouquet is highlighted, or opened? FAV to bring up the channel (service) list in the "current" bouquet...

ETA_2016

At some point between 4 AM and now AutoVisit had changed the TV bouquet from Favourites to Last Scanned too. Would the debug log show when that happened? Try this for me - Before putting the box into standby, if you're currently in a radio service swap to a TV service first, then put the box into s...

ETA_2016

After I deleted all the bloody annoying shopping channels, and the cruel sport of horse racing channel, entirely from my T4, the AutoVisit zapping EPG Update runs returned to the following channels: 06:05 ABC News 08:05 triplej 10:05 triplej 12:05 triplej Whoops. I should have said my AutoVisit onl...

ETA_2016

After I deleted all the bloody annoying shopping channels, and the cruel sport of horse racing channel, entirely from my T4, the AutoVisit zapping EPG Update runs returned to the following channels: 06:05 ABC News 08:05 triplej 10:05 triplej 12:05 triplej At some point between 4 AM and now AutoVisit...

ETA_2016

Geoff, for some reason, AutoVisit is using openshop (channel 7) for recordings & zapping, whereas all the other providers are the primary HD channels (except for C31). Do you care which service it zaps to? No. I just thought it was odd. Geoff, for some reason, AutoVisit is using openshop (chann...

ETA_2016

Geoff, for some reason, AutoVisit is using openshop (channel 7) for recordings & zapping, whereas all the other providers are the primary HD channels (except for C31). Also, when zapping, it changes the current service from triple J to openshop. That's very annoying. I've now deleted all the sho...

ETA_2016

Sorry Geoff, I've found a mistake in AutoVisit.sh. :wink: Line 65 (comment) refers to a 60-second visit. That's the version 1.0 AutoVisit.sh visiting time! That's line 75 :) Yes true, the comment would probably be better stated as "example, for 6x60 we will need..." and "for 5x30 we ...

ETA_2016

Grumpy_Geoff wrote: ↑
Sun May 24, 2020 19:38
Here's the changes for the new version...

Sorry Geoff, I've found a mistake in AutoVisit.sh.

Line 65 (comment) refers to a 60-second visit. That's the version 1.0 AutoVisit.sh visiting time!

ETA_2016

It now handles both live and recording radio services, and also a TV service not within your active TV bouquet (essentially the same bug). :D :D :D I've changed the trash recording deletion method so you shouldn't see any of the EPG recordings being left behind. :D I've also fixed the pre-start scr...

ETA_2016

message "The movie 'EPG#Upd8' has been deleted successfully" result true and the recording was deleted, though it's got an odd name. I thought so. Previously I was using the web interface to do the delete of the .ts file and the rest of the recording set were deleted with it, now I'm gonn...

ETA_2016

Out of interest, when this is entered in a browser does it delete the "20200524 1321 - C31 - EPG#Upd8.ts" recording from Trash? http://beyonwizt4/api/moviedelete?sRef=1%3A0%3A0%3A0%3A0%3A0%3A0%3A0%3A0%3A0%3A/media/hdd/movie/.Trash/20200524%201321%20-%20C31%20-%20EPG#Upd8.ts&force=1 I ...

ETA_2016

Could the script be interrupted, every time, though. You're right, it wouldn't. Actually, I might be wrong. As AutoVisit was being killed every time I listened to the radio, it was only running when I restarted the GUI or rebooted. Since it was only running at start-up and while I was using the T4,...

ETA_2016

Out of interest, when this is entered in a browser does it delete the "20200524 1321 - C31 - EPG#Upd8.ts" recording from Trash? http://beyonwizt4/api/moviedelete?sRef=1%3A0%3A0%3A0%3A0%3A0%3A0%3A0%3A0%3A0%3A/media/hdd/movie/.Trash/20200524%201321%20-%20C31%20-%20EPG#Upd8.ts&force=1 I ...

ETA_2016

Since 20/05? Yes. But, I have manually deleted the EPG#Upd8 recordings in the past. If the script gets interrupted then I'd expect them to hang around until next time. Could the script be interrupted, every time, though. But, that didn't occur when I first installed the script, so I wonder if it's ...

ETA_2016

100% of my AutoVisit.allow file not detected log entries, are while using the radio service. Since listening to a radio service kills AutoVisit, I don't know whether the same would happen, when I'm using a TV service. All I can say, is that error has never happened while using a TV service (accordi...

ETA_2016

100% of my AutoVisit.allow file not detected log entries, are while using the radio service. Since listening to a radio service kills AutoVisit, I don't know whether the same would happen, when I'm using a TV service. All I can say, is that error has never happened while using a TV service (accordi...

ETA_2016

I should have also said that when AutoVisit runs while using the radio service (only), the log states that it can't detect AutoVisit.allow, which stops it running (it won't run again without a reboot)! AutoVisit.allow is still present. That's not caused by having a radio service active though, as I...

ETA_2016

I should have also said that when AutoVisit runs while using the radio service (only), the log states that it can't detect AutoVisit.allow, which stops it running (it won't run again without a reboot)! AutoVisit.allow is still present.

And, AutoVisit_errs.log shows that line 212 is returning -1.

ETA_2016

Interestingly, you can now buy a replacement fan for the T4 & U4 for $13.95 + delivery.

ETA_2016

Interestingly, you can now buy a replacement fan for the T4 & U4 for $13.95 + delivery.

ETA_2016

Thanks Geoff, AutoVisit is an awesome script. I can't believe it hasn't been downloaded thousands of times. My only issue is, that I like to listen to radio channels on the T4. And, AutoVisit doesn't work while I'm listening to the radio, unless I'm already recording something on the TV. How can I s...

ETA_2016

Since last Saturday (21/09), all my recordings using Tuner B, have a duration of 0:00 (and no file size). The information for the timers of these recordings, show the timers ran for the correct time (pre offset + program + post offset, not 0:00). The last successful recording using Tuner B, was last...

ETA_2016

Is there a way to turn off the back lighting on the T4 remote, so the batteries last longer?

ETA_2016

Is there a way to set global default settings for autotimers, so you don't have to change the same settings every time you create an autotimer? While in the autotimer screen press menu then chose setup and/or Edit new timer defaults. Also why don't autotimers use the global padding times set in rec...

ETA_2016

Is there a way to set global default settings for autotimers, so you don't have to change the same settings every time you create an autotimer?

Also why don't autotimers use the global padding times set in recordings?

ETA_2016

peteru, I'm not sure you understood what I was asking for. I don't want FTA data mixed into IceTV's data. I'd like IceTV's EPG data (& timers) to only apply to the TV services, and the Radio services to use FTA EPG data. As there are separate EPG's for TV & Radio services, there's no reason ...

ETA_2016

There should be an option to prevent LCN's being changed, when unnecessary or duplicate channels are deleted or a favourites bouquet is set up.

ETA_2016

Currently, when you use the IceTV EPG, it provides the EPG data to both TV and Radio, but the IceTV EPG doesn't provide radio EPG data. The ABC provides EPG data for Double J, but I can't see it unless I disable IceTV. I should have the option to use the IceTV EPG for TV and the FTA EPG for Radio, a...

ETA_2016

When I've finished watching a recorded program, I go into the Media list and delete the file. The file continues playing until I stop it or it reaches the end of the recording.

When I delete a file it should stop playing.

Search found 45 matches

About the Forum

Join us